Przenośnik SKAG produkowany przez firmę AG-PROJEKT przeznaczony jest do wybierania materiałów sypkich z silosu takich jak:
The SKAG circulating screw conveyor is a device that enables emptying flat-bottomed silos from all materials that flow naturally, such as: wheat, rapeseed, rice, soybean, sunflower, biomass and Pellet. After filling the silo and covering the SKAG conveyor with material, you can start pouring (emptying) the silo. The scroll element covered with pipes in the SKAG screw rotates the material (grain) towards the central hole of the silo where there are other devices in the technological line responsible for the proper operation of the system such as bolt i scraper conveyor
The conveyor is mounted directly above the centrally located inlet in the silo to the device under the floor and transports the grain along the silo radius with simultaneous movement around the axis of the silo in a clockwise direction (viewed from above on the floor). Circular movement of the conveyor ends when the silo is empty of residual grain. Circular movement is forced by a rubber wheel drive. Usually it is one full circulation around the silo axis. Our device is designed for silos with a diameter of 6-27m and powered by gearmotors from 4kW to 11kW.
The modular design of the conveyor allows easy adjustment to the desired length depending on the size of the silo.
Operation of the SKAG conveyor can be done by switching on manual or automatic control adapted to the existing system of the customer
Model SKAG
The Rotex overload coupling of the Rotex type was used in the device between the gearmotor and the propeller shaft.
ZZO - allows for safe and quiet operation of the screw conveyor. ZZO enables full 360 ° rotation
The device uses a reputable company self-aligning bearing easy to disassemble and assemble.
Parameters and work culture are provided by a properly profiled worm wheel mounted on the worm shaft.
Depending on the demand for the length of the device, different lengths and quantities of covers are used.
Two reducers were used in the road wheel assembly. Due to such a procedure, a sufficiently slow gear ratio was obtained on the road wheel.
Stable operation ensures accurate selection of material from the silo at the right speed.
For proper operation, the device has a weighing shelf. The appropriate weight is applied to the shelf, which does not allow the device to float upwards and ensures stable contact with the surface.
We ensure stable connection of shields by using an intermediate module, the so-called shield connector The module provides three important things:
Circular movement is carried out using a worm drive. Circumferential speed was reduced by using a set of reducers to approx. 1 rpm (depending on the motor used to drive the worm). For circular motion, a heavy duty wheel with a full super flexible rubber tire was used.
Our devices have all the necessary certificates allowing the product to work in accordance with the standards.
We encourage you to contact us by phone or e-mail regarding SKAG conveyors. We provide advice in the selection and configuration of an assortment. Our experts will explain all technical matters related to AG-PROJEKT products.
Technical data:
Parameter | Jednostka | # | # |
Engine rated power | kW | #* | #* |
Screw rotation speed | obr/min | #* | #* |
Pipe diameter Ø | mm | # | # |
The diameter of the worm Ø jump | mm | # | # |
Nominal capacity | tons / hour. | #* | #* |
Equipment efficiency given for wheat grain with a moisture content of 16% and a density of 0.75 g / cm3. We have an ISO9001 quality management system. We reserve the right to make technical changes. We have an ISO9001 quality management system. We reserve the right to make technical changes.
Welcome to the gallery of objects